The Most Important Reasons That People Succeed In The Sliding Patio Doors Repair Industry

· 6 min read
The Most Important Reasons That People Succeed In The Sliding Patio Doors Repair Industry

Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This could be due to a variety of issues, including dirty tracks or misaligned rollers.

Clean the track first and making sure that the rollers are lubricated. You can also adjust the rollers using the adjustment holes that are located on the bottom side of the movable door panel.

Dirty or Damaged Track

A damaged or dirty track can cause the sliding door to not slide properly. Over time, dirt, grit, and even rust may accumulate and block the track from being able to slide smoothly. The solution is to clean the track thoroughly with an abrasive and mild detergent. This task should be performed regularly to ensure smooth operation and prevent expensive repairs in the future.

A leaking door is another common problem that requires immediate attention to avoid water damage, mold growth and structural deterioration. Most often, the issue is due to damaged weather stripping or misaligned doors. These can be corrected by replacing old weather strips and by aligning the door.



Rollers that bounce off the track are a frequent issue that can be repaired with a simple DIY work. Recruit a friend to help you with this task, as the door can be heavy. To reposition the rollers, stand inside the house and lean one of the panels towards you. Once the panel is lifted off the bottom track, you'll need place it on sawhorses to prevent it from falling off. Then, loosen the roller's screws and then pry them out with the help of a screwdriver. Then, you can clean any dirt stuck between the tracks and the wheel. Clean each wheel using denatured alcohol on a rug. Reposition the wheels to their tracks and attach them again.

It is possible to straighten bent track sections using a mallet made of rubber and a piece of wood. However in the event that the bent portion is near the hinges and has the potential to cause further damage, you'll be better off calling an expert to ensure safety.

Rollers that are misaligned

If your sliding door isn't sliding as smoothly it's most likely due to the roller wheels are misaligned with the track. The wheels may be dirty, rusted or their bearings are worn out. This friction causes the door to catch and grind when it's opened or closed. This can also result in noises that squeak.

Fortunately it's an easy fix. The wheels are mounted on the bracket, which can be adjusted, which means you don't have to remove the door. Locate the adjustment holes (usually on either side of the frame) and make use of a screwdriver to turn the screws that control the wheels. Turning the screw clockwise will raise the wheel, while turning it counterclockwise lowers it. Continue adjusting until the door moves smoothly and quietly when it is open or closed.

It's important to adjust the wheels prior to adjusting the latch. The latch hooks need to align with the strike plate (the opening into which the latch locks) to allow the lock to work correctly. If you don't do this, the latch could accidentally open or close when you're not in the room.

Sliding patio door are an investment. Maintaining them in good working order will ensure the safety of your family. By fixing common issues such as faulty tracks, rollers and handles, you can avoid costly repairs in the future. Contact us for more information about patio doors. We can help keep your sliding patio doors in good condition by assessing your repairs needed. Our professionals can also help with any replacement parts that you might require.

Loose or Damaged Door Frame

Sliding patio doors are a great option for any home. They offer a convenient and attractive alternative to hinged or swing-open doors for patios. But, just like other hardware doors, they can experience many issues in time. Fortunately, a lot of these issues are simple to fix with a bit of DIY expertise.

A common issue with sliding patio doors is gaps in the frame. This can be due to a number of factors, including misaligned track or rollers or a damaged track door, or a bowed door frame. In the majority of instances, the issue is easily solved by taking the doors off and reconnecting the track. This must be done with care to not cause damage to the track or frame.

In certain situations it is necessary to replace the entire track, which is easily done with a universal replacement kit that is available at most major hardware stores. These kits are easy to install and will have your door functioning properly again in no-time.

It is essential to regularly inspect your sliding door's frame and hardware for signs of wear and tear, like loose bolts or screws. This is a straightforward and effective DIY patio maintenance procedure that can be done with the help of a screwdriver. It is also important to oil the rollers and tracks of your patio door to ensure smooth operation and to prevent premature wear.

Patio doors are typically the primary entrance to the backyard and outdoor living space for many homeowners. As such, they need to be able to function correctly to maintain the comfort of their home and provide security. By taking the time to follow these simple DIY maintenance steps homeowners can extend the life span of their sliding patio doors and minimize the cost of repairs or replacements.

A faulty handle

Patio doors that slide open are a great way to access your backyard and also enter your home, but they can be difficult to operate if damaged or misaligned. A faulty handle may also cause the door to not open or close properly. The good news is that fixing a loose handle is a fairly simple job that can be completed at home.

In many instances the loose grip is the result of screws that have fallen out of the backplate. To fix this issue you can simply tighten the two screws on the inside of the handle using a screwdriver. If you find that the handle is still loose, it could be a sign that the threads are worn and will need to be replaced.

Or,  patio door repairs near me  damaged latch could be the cause. This is more likely to occur if the latch made of plastic, rather than metal. If the latch isn't catching or turning, you should try oiling it first to see if it aids. If not, you might require replacing the lock completely.

The handle, in turn, could become difficult to use if it is broken or damaged. If this happens, you'll need to replace the handle with one that matches the style and style of your patio doors.

Feldco can help restore your patio doors to their former splendor, no matter if they are brand new or old and outdated. We offer a broad selection of high-quality patio doors that come in a variety of sizes and styles. To learn more about our products, call us now! We proudly serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County.

Unusual Weatherstripping

If you're seeing light in closed doors and windows, or you notice a draft pulsing on the window or door It's time to change your weather stripping. These strips create an airtight seal that stops unwanted water, air, and pests from entering the home. It also keeps your conditioned and heated air inside, saving you energy costs all year round.

It may have lost its strong, bouncy seal due to age. You can easily diagnose this by running a dollar note under the seal on the top and bottom of the jamb and door frame where they overlap. If the dollar bill slides effortlessly between the seal and the door then it's time to replace the weather stripping.

It's tempting to remove only the worn section of weather stripping to replace it, but this will result in cracks on the sides of the new piece and could cause problems with the seal in the future. It's much more efficient to replace all of the stripping. This will allow you to be sure that your door will be properly sealed.

To make a DIY project that is simple take a look at our guide on weather stripping to remove the old weather stripping and install the right material to your sliding patio door and door frame to create a durable, tight seal. This is a great opportunity to save money on your energy bills and repair your sliding patio door. Don't wait until it's too late. Your wallet and home will thank you.